Fire-by-design AUTOMATED TIKI TORCH Bedienungsanleitung PDF herunterladen (Seite 8)

Step 9

In the photo at left you are looking at a close up of

the bottom of the Tiki Torch Head. Unless a

custom configuration is requested there will be the 2

wires as shown along with a ½” coupling.

Flare connection

for Gas Hose

Step 10

Attach the wires from the tiki torch head to the 2

wires coming up inside the center of the pole. We

recommend wrapping the wires that are coming up

through the pole counter clockwise around the gas

line 3 full turns in anticipation of threading the tiki

head onto the gas line.

Step 11

Thread the tiki torch head onto the tiki pole and then

secure by tightening the 3 set screws in the base of

the tiki torch head.

Installing the Tiki Torch Head

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Fire-by-design AUTOMATED TIKI TORCH Bedienungsanleitung Seite 8